How To Bypass Washing Machine Water Level Sensor

The water level sensor on recent washers serves to enhance efficiency, but it can sometimes confine the water to too much for your load. That is why many homeowners look to dominate the water level sensor to support a large load, and you can do it in numerous weighs including adding weight to the load.

Whether it be installing a new pipe, altering the pressure, or using the extra rinse alternative, let’s see how you can bypass the water sensor on your washing machine.

In this article, you will acquire many problems such as Maytag bravos washer water level adjustment, what water level should washing machine be on, and the main thing – how to bypass washing machine water level sensor.

How Washing Machine Water Level Switch Works

The water level switch of washing machine, sometimes named as “pressure switch,” on your washing machine functions by directing power from the timer control to the temperature switch and water bay valve every time the tub requires filling during a washing phase.

As the tub fills up, the switch turns off the flow of water when the level inside relates to the load setting used as large, medium, or small load.

Then, the switch signals the motor to start stirring. The water level switch can be found in numerous places, depending on your machine’s model and manufacturer. In most cases, you will find the switch inside the control support. 

It is easily detectable by the rubber tube that connects the switch to the side of the tub. As the washing machine fills, water moves through the tube from the base, increasing pressure. Once the pressure reaches an assured point, the switch will shut off and the water flow to the washer tub. The washing machine water level switch adjustment is made.

How To Bypass Washing Machine Water Level Sensor 2

What You Should Know About A Bypass Washing Machine

There is an option to enhance the water stage in a washer. You must set up an extra that acts as an alarm when the water stage will get too low. When this happens, the alarm will initiate a valve which then slowly lowers the water stage till it stops. This takes a bit extra upkeep than just turning up the freshwater lever in your machine. It is, however, much less risky than bypassing it.

Water Sensor For Washing Machine

Sometimes, the washing machine water level overrides. You can even buy a certain washer sensor that can trigger if you begin the machine and when the water initiates to leak. This sensor will flip the water off robotically when the water stage will get too low. With this approach, you don’t need to fret about turning it on and off yourself. Some styles of washing machines are fitted with such sensors.

Leak Pipes

But do you know that it’s not exclusively the washer itself that must be maintained? The water pipes of the washer are exactly what contribute to leaks. If these pipes are blocked, the water will be unable to easily circulate by way of them. As a consequence, they may activate a leak. These piping should be upheld often.

How To Bypass Washing Machine Water Level Sensor 4

Image Source: reviewjournal

How To Bypass Washing Machine Water Level Sensor

Your washing machine makes use of numerous types of detergents. It is vibrant that you simply change these detergents as needed. If you don’t, the washer will eventually develop a mildew scent. If it’s already started to scent, you’d be higher off changing the detergent rapidly. This will support stopping the beginning of a risky case of odor.


If possible, it is premium to keep away from utilizing harsh detergents. Some detergents including triclosan may trigger harm to the set. They are recognized to infect consuming water. Waterborne ailments may simply unfold if this chemical shouldn’t far away from the water provided. Bleach can also be one extra kind of tough detergent that’s discovered in lots of washing merchandise.

Checking Drain Tubes And Leaks

Other than testing and altering your water, you must also check your drain tubes often. Leaks generally tend to happen in these tubes due to the resistance that they must water flow. Bypass washing machines could also be very setting friendly, though in addition they pose a superb danger if these components will not be all the time maintained properly. You must to subsequently maintain an exhaustive eye on them.

Sometimes, the cause for water leak may be decided even with the presence of a bypass washer. If the issue shouldn’t be fixed, the water will proceed to leak till it’s mended. You can attempt cutting away a part of the pipe or linking it with a brand-new pipe.

If this doesn’t repair the issue, it is good to attempt altering the half that’s inflicting the issue. Before doing so, make it likely for there aren’t any obstacles within the pipes close to the place the half is hooked up. With this tactic, you maybe can make sure that the half will work properly once more.

How To Bypass Washing Machine Water Level Sensor 5

Image Source: choateshvac

Contact An Expert

It shouldn’t be appropriate for an individual to restore a bypass washer on his odd. This is because you may just make issues inferior by cutting the wires or critical different vital components. You ought to later contact an expert so that he can carry out the obligatory repairs.

This home equipment is powered by electrical energy and should be repaired properly to stop shock. Expert cleaners can even clean the insides of the equipment so that they give the impression of being closed as well as new.


A bypass washer needs minimal maintenance. The exclusive factor that you need to do is often exchange the water and run the rinse phase to make sure that it works properly. As a simple rule, you shouldn’t use water that’s too burning when washing garments. It is a usual mistake for some people to observe too many washes without changing the washing machine’s lint filter.

How Does A Washing Machine Sense The Water Level?

Washing machines use air pressure to sense the level of water. The washing machine typically has a pressure switch. As the water fills the tub, the air in the pressure tube becomes hassled and trapped. This pressure signals the pressure switch to inform it that the water level has increased. Sometimes, the washing machine water level sensor not working.

Some machines have 1 level, some have 2, and others have 3. These sensors detect a minimum and maximum level for various cycles to ensure the suitable amount of water depending on your laundry load. This washing machine water level sensor plays a vital role.

This auto-sensing technology generally works out pretty well, but it can have glitches. Usually, it malfunctions in the sense that the machine overspills. But in other cases, it might not fill up enough to clean your clothes proficiently.

A Glance Into High-Efficiency Washers

High-efficiency washing machines cut down on the quantity of water they use by up to 80%. They also let you save up to 65% of the energy expenses to run the washer. Nonetheless, sometimes the water they permit for washing individual loads is not satisfactory.

Some people have criticized of:

  • Soap layer and residue on their clothing
  • Pieces of clothing that felt dry despite going through the washing machine
  • Sniffing as if the clothes are not washed
  • Having to put the clothes back in for a second phase

As you can see, these issues can be very infuriating. So, how can you fix them?

How To Trick My Washer To Use More Water 

The most arising question is How to fix water level sensor in washing machine. Sometimes, the water levels sensor may not function as wanted. You just found out that it’s too low or too much for your washing load.

That may prompt you to repeat the washes phases for cleaner laundry! Other times, the water is in excess and will make your clothes too damp. Don’t worry about this. It is calm to fix.

We have researched for you several methods to deal with washing machine water level sensor. Each method has forthright steps on how you can adjust the water levels in your washer. Plus, with the hack washing machine to use more water, you’ll be able to get the most out of it.

The easy steps below show how to bypass washing machine water level sensor. Find out how to fix that below;

1- Adjustments To The Water Level Control

How do I adjust the water level in the washing machine? This is very simple. Here is how to go for it.

• Inspect and identify the water level switch

Unlike machines, water level switches are placed in altered locations but in most cases, they will be in your washer’s console. To differentiate the water levels, switch from other switches, the function has a rubber hose running from the switch down to the side of the tub

• Regulate the set screw pressure

While on the console, adjust the water level controls for the cycle. Be sure that the drainer tube is above the maximum water levels in the tub; otherwise, it will drain off water from the drum and leave it at the lowest level.

• Make tighter the spring-loaded disk

Using a screwdriver, adjust and tighten up the spring-loaded disc inwardly. This step upsurges the maximum water levels and helps you to bypass the water levels sensor.

• Fasten the screw

Do this using thread locker glue to fix the set screw in place. That will confirm it does not become loose when the machine shakes.

How To Bypass Washing Machine Water Level Sensor 6

Image Source: Around The Home

2- Trick Your High-Efficiency Washer

The major question is How do you trick a high-efficiency washer? The reasoning behind this is to stable your washer with the laundry load. It is a calmer method how you can bypass washing machine water level sensor.

To strike a perfect equilibrium, you can trick the washer’s water levels switch. That will bypass the washing machine water levels sensor and increase to a suitably required level. There are two means you can trick a high-efficiency washing machine;

• Make the laundry load huger

The huger the laundry load, the more operational the spinning. In short, add old clean clothes with like colors into your load to make it larger.

• Make the clothes in the washtub heavier.

To attain a heavier load, spout in two pints of water on the clothes. When the clothes are wet they become heftier. The bigger density will pressure the switch, which in turn, will activate water levels to rise.

How To Bypass Washing Machine Water Level Sensor 7

Image Source: maidbright

3- Installing An Alternative Water Tube

This method works paramount for a top-loading washing machine. It removes the purpose of the failing water level sensor and helps you to bypass that. You will need a 6 feet water pipe, pipe caps, and a splitter with passages.


  • Turn off the machine’s hot and cold water taps.
  • Use the screw on the main splitter and attach it to the hot or cold water taps.
  • Connect the normal wash cycle water pipe to one splitter’s vents.
  • Fix the 6 feet pipe to the other splitter’s vent.
  • Open the static pipe using the spigot at the splitter just when the drum fills to the preferred level.

4- Use A Bulk Option

When using smaller washing loads, utilize the bulk option to confirm the clothes are thoroughly washed with adequate water. That stabilities your drum and helps to bypass the washer’s water level sensor.

How To Bypass Washing Machine Water Level Sensor 8

Image Source: whirlpool

5- Select The Water Level Selection

Many people overlook this option. In most machines, it’s right next to the added rinse phase on the washer’s console. If the water level option doesn’t work efficiently, you can combine that with the added rinse option.

Turn your water level to the extreme level to allow an extra rinse. If this two flop to functions, you have all the above tricks to get enough water into your washtub.

Modern washing machines are crucial. They clean laundry fast and professionally. With a high-efficiency washer, you are equipped numerous sensors that perform efficiently using less energy and water. You can appropriately wash without having to worry about how water will be controlled.

The machine controls the water levels inevitably; though, problems always happen in most cases where a washer has no alternative to stop the water level sensor. The machine will not clean efficiently. It will either have little or extra water. 

How To Bypass Washing Machine Water Level Sensor 9

Image Source: bestbuy

How To Fix Water Level Sensor In Washing Machine

If you have a defective water sensor for washing machine, it is likely caused by 2 problems such as a blockage in the pressure tube, or electrical failure. Depending on the specific issue, you can either clear the tube out or check for failure using a multimeter.

• Examine the pressure tube

Before you examine for electrical failure, you want to clear out any impasses that may be causing your water level to switch to a fault. To do this, first, unplug the machine from the wall and find the tube linked to the water level switch.

Then, detach the tube from the fittings on either end and examine each side for debris, kinks, or holes. Clean and clear out the tube accordingly and level or replace the tube as required. A good cleaning may be all the switch needs to yield it back to being fully operative.

• Testing for electric failure

To examine the water level switch for electrical failure, you need to use a multimeter set at OHMS x 1. Your water level switch has 3 terminals. Find, disconnect, and test them for continuity in pairs. First, place the meter analyses on terminals 1 and 2, make note of the reading, and continue testing the rest in pairs.

The reading should either be immensity (means no continuity), or a value close to 0.0 (continuity). A properly working water level switch will have two pairs with no continuity, and one with steadiness.

Some Useful Tips On How To Bypass Washing Machine Water Level Sensor:

High-efficiency washers are the best choice if you are looking to conserve energy and water. The water level sensor will control the amount of water you need based on your load weight. Sometimes, the amount of water is not suitable for an excellent washing of your outfits.

To bypass a washing machine water level sensor, you can add weight to your load by wringing your garments in water. This extra water will trick your machine into thinking there are more kinds of stuff in the tub, bypassing the sensor. You can also try selecting the additional rinse or bulk settings or regulating your machine’s pressure switch.

While this may look like it defeats the persistence of water conservation, you will still use less water than a normal washer.


Most washing machines use air pressure to determine the water level inside. The pressure switch also mentioned above, comes in handy for this purpose. As the water fills in the machine, the air becomes pressurized and trapped, sending signals to the pressure switch that the water level has reached its limit.